
NFPA Duplex RVL Horizontal Tank Mount
The duplex horizontal tank mount lubricated rotary vane pumps provide footprint reduction and enhance the overall serviceability by means of a compact design. Relative to the space saver configuration, the horizontal tank mount is capable of accommodating larger sized pumps and accessories. The duplex horizontal tank mount configuration consists of two vacuum pumps mounted on top of the tank. Positioned horizontally on top of the receiver tank, this configuration is available for pumps ranging between 1.5 – 10.1 HP, offering you maximum space efficiency.
Specifications
Features
Downloads
Specifications
Control Panel
- UL listed control panel in a NEMA 12 enclosure with a 5.7″ Touch Screen Display
- Manual reset for all alarms
- All control and alarm functions shall remain energized while any pump in the system remains electrically online
- Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
- Lag pump will start automatically should the lead pump fail to operate
Vacuum Pump
- Oil-Sealed Rotary Vane type with air cooled design
- Dynamically balanced multi-vane design
- Bearings are permanently lubricated and sealed
- Pump shall be direct driven
- Equipped with a built-in anti-suck back valve mounted at the pump inlet
- Means of removal of the vacuum pump for service or replacement without interruption to the system
Air Receiver
- ASME certified with provisions for isolating the receiver without interruption of the vacuum service
- Rated for full vacuum service with a minimum 200 psig design pressure
- Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing
Features
General Features
- Oil-Sealed Rotary Vane vacuum pump with air cooled design
- UL listed control panel in a NEMA 12 enclosure with a 5.7″ Touch Screen Display
- Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
- Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing
Design Options
- Please click the pink “manuals” icon above to download our NFPA design guide for air compressors.
- Please click the purple “ordering guide” icon above to download our sizing guide for Source equipment.
Downloads
Brochure
Flyer
Manual
Spec Sheets
as_sp_premium_3_5_control_panel
as_sp_premium_5_7_control_panel
as_sp_premium_7_5_control_panel
Drawings