
The Amico stainless steel pigtails shall have a core which consists of Teflon (polytetrafluoroethylene) with two outer reinforcing jackets of stainless steel braid. The braid will incorporate a type 304 full hard drawn stainless steel wire. It shall consist of a 1/4″ nominal I.D. The Amico stainless steel pigtails shall come with a check valve equipped to one of the ends.
Specifications
Gallery
Features
Specifications
Specifications
- The Amico stainless steel pigtails shall have a core which consists of teflon (polytetrafluoroethylene) with two outer reinforcing jackets of stainless steel braid. The braid will incorporate a type 304 full hard drawn stainless steel wire. It shall consist of a 1/4″ nominal I.D. The Amico stainless steel pigtails shall come with a check valve equipped to one of the ends.
- Note: Burst pressure ratings for pigtails are determined at room temperature with the hose in a straight line. A safety factor of 4:1 or 5:1 should be used for normal applications. Impulse and shock pressure applications may require a higher safety factor.
- Note: Do not apply heat to pigtails.
- All cylinder connections machined to CGA specifications for applicable gases.
Gallery
.
Features
General Features
- Burst pressure rating at room temperature: 12,000 psig
- Maximum 3000 psig working pressure on tubing
- All pigtails 100% tested before shipping and labelled for gas service and pressure rating
- Standard length 36″ (3′), length is customizable
- Includes a sticker that indicates the direction of the flow